The electrical equipments are numbered in accordance with "CATALYTIC - KULJIAN's PROJECT PROCEDURE MANUAL" as follows:


The prefix letters identifying the electrical equipments in this plant are as
follows:
SG    - 7.2KV metal-clad switch-ear
US    - secondary unit substation
BD    - bus duct
MCC    - motor control center
TR    - transformer board
DB    - power panel, power distribution panel, DC distribution board
L P        - 11ga-rg panel
R           - battery charger
BA        - battery
N            - power receptacle, air conditioning control panel, relay box, interface 
                 panel, etc.
P(EM)     - motor for pump
A(EM)     - motor for agitator
F(EM)     - motor for filter or screen
C( EM)    - motor for fan or blower `:
M( EM)    - motor for handling equipment

M.V Motors (6.9 Kv) – Vertical-


        Trouble       
Cause
Remedy
1- Doesn't rotate   
    (No-sound).

- Connections not complete.
- Defected circuit between supply and motor terminals (Disconnection – bad connection).
- Stator circuit open.
- Single phase connection (burn fuse).
- Check circuit for disconnection or bad connection.
-  Check terminals.
- Check stator coil and replace it if necessary.
- Check fuses and replace it.
2- Over load trips   
     at starting
- Defected starter.
- Short circuited coil.
- Mechanical jam.
- Check starter and repair or replace it.
- Check stator coil and replace if necessary.
- Check if the load locked.
- Check coupling, and ensure the alignment.
- Check the air-gap clearance and adjust it.
- Check bearing and replace if necessary.
        Trouble       
Cause
Remedy
3- Noise and
     vibration
- 1 phase operation (worn fuses – circuit disconnections).
- Unbalance voltages.
- Mechanical fault.
- Vibration from load.
- Unsymmetrical coupling.
- Check all phases
- Replace worn fuse
- Dissemble the motor and check rotor bars.
- Check air-gap clearance and adjust it.
- Find out any foreign matters
- Check shaft.
- Check end rings.
- Check coupling and adjust it.
- Check load fixing screws.
4- Extreme temperature and smoke.
- Up-normal high voltages.
- Up-normal low voltage.
- Wrong frequency.
- Weak cooling.
- Over load.
- Burn coil.
- Mechanical fault
- Check supply voltage and     frequency and adjust it.
- Check cooling system and melt    water.
- Check if the load is over or there is some other faults in load.
- Check stator winding and repair it or replace it.
- Check air-gap clearance.
- Check bearing temperature and lubrication system.
- Check alignment.

5- Defected bearing.
- Oil deterioration.
- Excess motor pushing.
- Wrong thrust bearing erection.
- Check oil for:-
   a. foreign matters.
   b. lake of oil.
- Check oil cooling system
- Check if there is a shaft current.
- Replace bearing.
معلومات عن التدوينة 21 فبراير 2014 عدد الزيارات: (850) عدد التعليقات: 2 الكاتب:iHussam للإبلاغ عن رابط معطوب اضغط هنا للإبلاغ عن رابط معطوب اضغط هنا جميع الحقوق محفوظة ( إتفاقية نقل ونشر المحتوى )

Post a Comment

  1. Electrician Mosman is the one trusted name and is renowned for its immediate response towards customer’s prerequisites.Thanks for sharing.......
    Electrician Neutral Bay

    ReplyDelete
  2. Great information.Thanks for sharing this useful information. Electrician Manly is the best alternate for preparing electric details according to the electric load.

    Electrician Mosman

    ReplyDelete
  3. great information about Electrician Mosman..I am really thankful to you for this great read!! You did a very great job, keep it up...

    ReplyDelete
  4. Great Blog!! That was amazing. Your thought processing is wonderful. The way you tell the thing is awesome. You are really a master...Electrician Mosman

    ReplyDelete
  5. I really appreciate the concept that you have posted here. It's a big help for us especially to those people want a satisfaction service from there hired electrician in Mosman. They must know or read about this concept to be aware in everything that will be happen during installing or rewiring electricity and to preventable hazardous. Thanks

    ReplyDelete
  6. I really liked your blog, appreciate the great information about Electrician Mosman...Many thanks.

    ReplyDelete

 
Top